Sharp PG-LW3000 User Manual

There are two important reasons for prompt warranty registration of your new 

SHARP Projec tor, using the REGISTRATION CARD packed with the projector.

This is to assure that you immediately receive the full benefit of the parts, 

service and labor warranty applicable to your purchase.

To ensure that you will promptly receive any safety notification of inspection, 

modification, or recall that SHARP may be required to give under the 1972 

Consumer Product Safety Act, PLEASE READ CAREFULLY THE IMPORTANT 

“LIMITED WARRANTY” CLAUSE.                                                       

U.S.A. ONLY

The enclosed computer cable must be used with the device. The cable is

provided to ensure that the device complies with FCC Class A verification.
 

U.S.A. ONLY

FCC Regulations state that any unauthorized changes or modifications

to  this  equipment  not  expressly  approved  by  the  manufacturer  could

void the user's authority to operate this equip ment.

U.S.A. ONLY

This is a Class A product. In a domestic environment this product may cause

radio interference in which case the user may be required to take adequate

measures.

The lightning flash with arrowhead sym­

bol, within an equilateral triangle, is in­

tended to alert the user to the presence

of  uninsulated  “dangerous  voltage”

within the product's enclosure that may

be of sufficient magnitude to constitute

a risk or electric shock to persons.

The exclamation point within a triangle

is intended to alert the user to the pres­

ence of important operating and main­

tenance  (servicing)  instructions  in  the

literature accompanying the product.

See bottom of projector.

To reduce the risk of fire or electric shock, do not

expose this product to rain or mois ture.

High brightness light source. Do not stare into the beam of light, or view

directly. Be especially careful that children do not stare directly into the

beam of light.