Sharp PG-LX3500 User Manual

5 Setting the Video System

The video input system mode is factory preset 

to “Auto”; however, a clear picture from the 

connected audio-visual equipment may not be 

received, depending on the Video signal 

difference.

In that case, switch the Video signal.

Selectable items

Auto
PAL
SECAM
*NTSC4.43
NTSC3.58
PAL­M
PAL­N
PAL­60

*  When reproducing NTSC signals in PAL 

video equipment.

• The Video signal can only be set in VIDEO

mode.

• When “Video System” is set to “Auto”, you

may not receive a clear picture due to signal

differences. Should this occur, switch to the

video system of the source signal.

Menu operation n Page 

6 Setting the Video Setup

Selectable 

items

Description

0 IRE

Sets the black level to 0 IRE.

7.5 IRE

Sets the black level to 7.5 IRE.

• This function is available for the following

signals.

With COMPUTER/COMPONENT input:

­ 480

I

With VIDEO input:

­ NTSC3.58

7 Checking the Input Signal

This function allows you to check the current 

input signal information.