Sharp PG-LX3500 User Manual

Useful

Featur

6 System Lock Function

This function prevents unauthorized use of the
projector. Once this function is activated,
users must enter the correct keycode each
time the projector is turned on. We suggest

you record the keycode in a safe place

where only authorized users have access.

Info

• If you lose or forget your keycode, contact

your nearest Sharp Authorized Projector
Dealer or Service Center (see page

). Even

if the product warranty is valid, the keycode
reset will incur a charge.

a Setting/Changing the Keycode

Select “System Lock”, then press

ENTER or Q.

Select “Next”, then press ENTER.

• The screen for entering the keycode

appears.

Press the 4 buttons on the remote

control or on the projector to enter
the preset keycode in “Old Code”.

• When setting the keycode for the fi rst time,

press R on the projector for four times.

Setting the System Lock

PRJ - ADJ1

Old Code

New Code

Reconfirm

– – – –

• If you input a wrong keycode, the cursor returns to

the fi rst point of the “Old Code”.

• The preset keycode is 4 R buttons on the

projector. When you press the R button four
times, the keycode input screen disappears.

Note

Menu operation

n Page

Press the 4 buttons on the remote

control or on the projector to enter
the new keycode in “New Code”.

• You cannot use the following buttons

for keycode: STANDBY/ON, ON,

STANDBY, ENTER, RETURN and

• System Lock function recognizes

each button on the remote control

or on the projector as an individual

button, even if they share the same

button name. If you used the buttons

on the projector in setting your

keycode, the keycode cannot be

canceled with the remote control.

Note

Setting the System Lock

Old Code

New Code

Reconfirm

* * * *

–

– – –

– – – –

PRJ - ADJ1

Enter the same keycode in “Re-
confi rm”.

To cancel the keycode that you have
already set

• Press R on the projector for four times in

steps 4 and 5 above.

When the System Lock is set

• When System Lock is set, the keycode input

screen appears after the power is turned on.
When it appears, enter the right keycode to
start projection.

Input screen for keycode

System Lock

– – – –

Note