Manualsbrain.com
  1. Manuals
  2. Brands
  3. Sharp
  4. PG-LX3500
  5. User Manual

Sharp PG-LX3500 User Manual

Download
Page of 77
59
Useful 
    
   
Featur
es
Using 3D Viewing Mode
Use the following procedure to project 
3D images. 
For operation of the 3D LCD shutter 
glasses and the 3D-video playback 
equipment, see the corresponding 
operation manual.
O
/Q
 buttons 
ENTER button 
3D MODE button 
Projecting 3D images
1
  Turn the projector on.
2
  Turn the 3D-video playback 
equipment on.
• Set the 3D­video playback equipment so
that it outputs one of the signals listed in
the Compatibility Chart in this operation
manual.
3
  Switch the Input mode of the 
projector to enable input of 3D 
video signals.
4
  Operate the 3D-video playback 
equipment and play back the 3D 
content.
5
  Turn the 3D LCD shutter glasses 
on and place them over your eyes.
6
  Press 3D MODE on the remote 
control to display the 3D MODE 
menu.
Info
• If “An invalid button has been pressed.”
is displayed, a 3D­compatible signal is
not being input. Check the output signal
on the playback equipment.
7
  Press Q to set “DLP
®
 Link™” to 
“On”.
8
  Press ENTER to switch the mode 
and enable more natural 3D 
image viewing.
Warning!
• If the projector, 3D­video playback
equipment, and 3D LCD shutter
glasses are not properly set, you may
experience eye strain in addition to not
being able to view the images in 3D.
9
  Press 3D MODE.
• The 3D MODE menu will disappear.
• If the images are not displayed in 3D, repeat
steps 6 to 8.
• You can also use “DLP
®
Link™” and “DLP
®
Link™ Invert” on the menu screen to change
the 3D setting.
Note
Ending 3D projection
1
  Press 3D MODE on the remote 
control to display the 3D MODE 
menu.
2
  Press O to set “DLP
®
 Link™” to 
“Off”.
3
  Press 3D MODE.
• The 3D MODE menu will disappear.
Viewing Stereoscopic 3D Images (Continued)