Sony VPL-FH30 User Manual

Page of 8
4
Other Features
Picture-by-Picture
With this feature, users 
can project two different 
images at the same 
time, greatly expanding 
creative possibilities and 
enabling exciting new 
applications.
Screen Aspect
When screen and image aspect ratios do not match*, this 
function fits the projected image to the screen.  So, even when 
images are switched between different aspect signals, the 
projected image can always fit the screen.
* Using the same aspect ratio between screen and projector is ideal.
Quiet Noise Operation
Low noise fans designed to produce lower frequency sounds 
to be less obtrusive
Closed Captioning
Official teletext broadcasting, developed by the NCI, USA
Security Pack
Security lock (password and mechanical), security bar, panel 
key lock, and security label
Test Pattern Key
For easy screen adjustment
ID Mode
For individual control of multiple projectors
Freeze Function
Freezes the projected image
Smart APA
Auto pixel alignment
Direct Power On/Off
Direct power control using the circuit breaker on the switch 
board
High Altitude Mode
For projector operation at high altitude
Network and Control
Controls and monitors projector status
Compatible with various control systems
DICOM GSDF Simulation*
The VPL-FH30 is equipped with a new gamma mode, called 
DICOM GSDF Simulation.  This is ideal for viewing digital 
medical imagery for non-diagnostic applications.
* Follows GSDF (Grayscale 
Standard Display 
Function) medical 
standards for DICOM 
(Digital Imaging and 
Communications in 
Medicine).
* This function is for training 
and reference only, and 
cannot be used for 
medical diagnosis.
Lamp and Filter Synchronized Maintenance
When the air filter must be cleaned, a timely message is 
displayed on screen.  The lamp and the filter are accessible 
from the same side, so their maintenance can be performed 
without uninstalling the projector.  With typical usage, the 
filters have an approximate 
15000-hour cleaning 
cycle.  This is achieved by 
a Quad Filter system which 
means the filters only need 
to be cleaned when the 
lamp is changed, even in 
harsh conditions, saving 
maintenance time and 
cost.
simulated images
Fine mesh filters
Normal mesh filters
Hybrid element
Air flow direction
Quad Filter System
Gamma curve*
Standard 2.2
DICOM GSDF simulation
simulated images
0
200
400
600
800
1000
10 
20 
30 
40 
50 
60 
70 
80 
90 
100 
Output luminance [%]
Input level
Standard 2.2
DICOM GSDF sim.
*Based on internal testing.