Toshiba TDP-P4 User Manual
8
S
e
t
t
i
n
g
u
p
t
h
e
P
r
o
j
e
c
t
o
r
Connecting a Video Player
If your video player uses a round, one-prong composite video
connector, use the composite video cable. If your video player
uses a round, four-prong S-video connector, use the S-video
cable. S-video generates a higher quality image.
connector, use the composite video cable. If your video player
uses a round, four-prong S-video connector, use the S-video
cable. S-video generates a higher quality image.
NOTE: HDTV sources must be
connected to the projector using
the computer cable (not the video
cable). See the previous pages for
details on connecting this cable.
1
Plug one end of the composite video cable into the “video-
out” connector on your video player (Figure 7). This connec-
tor may be labeled “To Monitor.”
out” connector on your video player (Figure 7). This connec-
tor may be labeled “To Monitor.”
•
If you’re using an S-video cable, plug one end of the
S-video cable the “S-video out” connector on the video
player.
S-video cable the “S-video out” connector on the video
player.
2
Plug the other end of the cable into the appropriate video con-
nector on the projector.
nector on the projector.
F
IGURE
7
Connecting the projector to a video player using a composite video cable
CAUTION: Your video player
may also have a “Video Out”
connector for a coaxial cable
connection. DO NOT use this to
connect to the projector.
The projector is compatible with these major broadcast video
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and
SECAM. It automatically adjusts to optimize its performance for
the incoming video.
standards: NTSC, NTSC 4.43, PAL, PAL-M, PAL-N, PAL-60, and
SECAM. It automatically adjusts to optimize its performance for
the incoming video.
in
video cable