Elmo CRP-26 User Manual

Auto PC Adjustment function is provided to automatically adjust 

Fine sync, Total dots, Horizontal and Vertical 

positions to conform to your computer.

The adjusted parameters from the Auto PC Adjustment can 

be stored in the projector. Once the parameters are stored, 

the setting can be done just by selecting a 

Mode (1–5) in 

the PC System Menu (see page 28). See also “Store” on 

page 31.



 •

Fine sync, Total dots, Horizontal and Vertical 

position of some computers cannot be fully adjusted 

with the Auto PC Adjustment function. When the image 

is not provided properly with this operation, manual 

adjustments are required (pp.30-31).

 • The Auto PC Adjustment cannot be operated when

480i, 

575i, 480p, 575p, 720p,1035i or 1080i is selected in the 

PC System Menu (p.28). 

Press the MENU button to display the On-Screen 

Menu. Use the Point 

▲▼

 buttons to select 

PC adjust 

and then press the Point 

►

 or the SELECT button.

Use the Point 

▲▼

 buttons to select 

Auto PC adj. and 

then press the SELECT button.

Use Point 

▲▼

 buttons 

to select 

adj. and press the SELECT button.

Please wait... appears while the Auto PC 

adjustment is in process.