Elmo CRP-26 User Manual

This projector has the picture screen resize function, which 

enables you to customize the image size.

Provide the image to fit the screen size.

Provide the image in its original size. When the original  

image size is larger or smaller than the screen size 

(1024 x  768), the projector enters to the panning  mode  

automatically. Use the Point 

▲▼◄►

buttons to pan the 

image. When adjusted, the arrows will turn red. When 

reached to the correction limits, the arrows will disappear.

Full 
Provide the full screen image. 



 • The Screen Menu, only 

Normal and Custom can be operated, wide will be disabled and displayed in gray 

when 

720p(HDTV), 1035i (HDTV), or 1080i (HDTV) is selected in the PC System Menu (p.28).

 • This projector cannot display any resolution higher than 1920 x 1200. If your computer’s screen resolution is

higher than it, reset the resolution to the lower before connecting to the projector.

 • The image data in other than 1024 x 768 is modified to fit the screen size in initial mode.

 •

True, Full, and Digital zoom +/– are disabled and cannot be displayed when 480i, 575i, 480p or 575p is 

selected in the PC System Menu (p.28).

To store the adjusted data, select 

Store and press the Point 

►or the SELECT button. Use the Point

▲▼

 buttons to 

select one from 

Image 1 to 4 and press the SELECT button. 

A confirmation box appears and then select 

yes. Stored 

data can be called up by selecting an 

Image (1–4) in the 

Image Mode Selection on page 32.

wide
Provide the image to fit the wide video aspect ratio (16:9) by 

expanding the image width uniformly. This function can be 

used for providing a squeezed video signal at 16:9.

Press the MENU button to display the On-Screen 

Menu. Use the Point 

▲▼

 buttons to select 

Screen and 

then press the Point 

► or the SELECT

 button.

Use the Point 

▲▼

buttons select the desired item and 

then press the SELECT button .

A confirmation box appears and 

then select 

yes.