Elite Screens M113NWS1-SRM User Manual

1.  Pull the screen down from the lanyard or from the handle only in a 90-degree angle. Do not attempt to  
  pull the screen down by the surface or touch the screen, as it will damage the screen and void the  
 warranty.

2.  If you want to the screen to retract back, simply pull the screen down more than 2 inches and retract  
  the screen back by quickly and smoothly releasing it up gently. The screen is equipped with a SLOW  
  RETRACT MECHANISM (SRM) which allows the screen to slowly retract without the need to hold on  
  to the handle or lanyard. Simply release the handle and the screen will retract by itself.

 

Always pull the screen down or let it up in a 90-degree vertical angle. Do not allow the screen 

to touch the screen case when the screen goes up or comes down to avoid damaging the screen mate-
rial.

 

An internal auto-lock mechanism system will cause the screen to stop and lock on the position 

at intervals.

 

Always release at a 90-degree angle and do not let go until the screen is entirely inside the 

case If ever the screen feels stuck, keep in mind that the screen’s mechanism is new and needs to be 
run up/down a few times to loosen up. If this happens, carefully with a little force yank the screen 
straight down to unlock the screen.

Clean matte white screen material with a soft cloth and mild soap with water.
When not in use, retract screen in its housing to keep the screen material surface clean.

- 3 -

info@elitescreens.com

 

Improperly bringing the screen up/down will damage the screen material or rolling system.