Epson EB-520 User Manual

Submenu

Function

IP Address Dis 
play

To prevent the IP address from being displayed on Network Info
in the Network Menu and on the LAN Standby screen, set this to
Off

.

When  this  is  set,  you  receive  an  email  notification  if  a  problem  or  warning
occurs  in  the  projector.

s

Submenu

Function

Mail Notification

Set to On to send an email to the preset addresses when a problem
or warning occurs with a projector.

SMTP Server

You can input the IP address

 for the SMTP server for the

projector.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a number from
0 to 255)

Submenu

Function

Port Number

You can input the port number for the SMTP server. The default
value is 25. You can input numbers between 1 to 65535.

Address 1 Set 
ting/Address 2
Setting/Address
3 Setting

You can input the email address of the destination to send the
notification email to. You can register up to three destinations.
You can enter up to 32 single-byte alphanumeric characters for
the email address. The following characters cannot be used: " ( ) , ;
< > [ \ ]
The address for destination 1 is the mail notification sender's
address.
You can select the problems or warnings to be notified about by
email. When the selected problem or warning occurs in the
projector, an email is sent to the specified destination address
notifying that a problem or warning has occurred. You can select
multiple items from the displayed items.