Epson EB-520 User Manual

The  projector  is  recognized  as  a  removable  disk  by  the  computer.

d

Copy  the  batch  setup  file  (PJCONFDATA.bin)  that  you  saved  to
your   computer   to   the   toplevel   folder   of   the   removable   disk.

a

Do  not  copy  any  files  or  folders  other  than  the  batch  setup  file
to  the  removable  disk.

e

Perform   "Remove  USB  Device"  on  your  computer,  and  then
disconnect  the  USB  cable.

a

When  using  OS  X,  perform  "Remove  EPSON_PJ".

When   all   of   the   indicators   start   flashing,   the   settings   are   being
written.

Do   not   disconnect   the   power   cord   from   the   projector   while   the   settings
are  being  written.  If  the  power  cord  is  disconnected,  the  projector  may
not  start  correctly.

When  writing  completes  normally,  the  projector  turns  off,  and  only  the
power   indicator   is   lit   blue.

Check

Remedy

Are the lamp indicator and the
temperature indicator flashing orange
quickly?

The batch setup file may be corrupt, or the
USB storage device or USB cable may not
be connected correctly. Disconnect the
USB storage device or USB cable, unplug
and then plug in the projector's power
cord, and then try again.

Are the power indicator and the status
indicator flashing blue quickly, and the
lamp indicator and the temperature
indicator flashing orange quickly?

Writing the settings may have failed and
an error may have occurred in the
projector's firmware. Stop using the
projector, remove the power plug from
the electrical outlet, and contact your local
dealer or the nearest address provided in
the Epson Projector Contact List.