Epson EB-520 User Manual

Page of 193
This  section  explains  how  to  replace  the  lamp  and  the  air  filter.
Replacing the Lamp
Lamp  Replacement  Period
It  is  time  to  replace  the  lamp  when:
• The  following  message  is  displayed.
"Time  to  replace  the  lamp.  Please  contact  your  Epson  projector  reseller  or
visit  www.epson.com  to  purchase."
The  message  is  displayed  for  30  seconds.
• The  power  indicator  is  flashing  blue,  and  the  lamp  indicator  is  flashing
orange.
• The  projected  image  gets  darker  or  starts  to  deteriorate.
Attention
• The  lamp  replacement  message  is  set  to  appear  after  the  following  time
periods  in  order  to  maintain  the  initial  brightness  and  quality  of  the  projected
images.
When   Power  Consumption  is  set  to  Normal:  About  4,900  hours
When   Power  Consumption  is  set  to  ECO:  About  9900  hours
s
  ECO   -   Power  Consumption  
• If you continue  to use the  lamp after the replacement period has passed, the
possibility  that  the  lamp  may  explode  increases.  When  the  lamp  replacement
message  is  displayed,  replace  the  lamp  with  a  new  one  as  soon  as  possible,
even  if  it  is  still  working.
• Do not  repeatedly turn off the power and immediately back on. Turning the
power  on  and  off  frequently  may  shorten  the  lamp's  operating  life.
• Depending  on  the  individual  characteristics  of  the  lamp  and  the  way  it  has
been  used,  the  lamp  may  become  darker  or  stop  working  before  the  message
is  displayed.  You  should  always  have  a  spare  lamp  unit  ready  in  case  it  is
needed.
• We  recommend  the  use  of  genuine  EPSON  option  lamps.  The  use  of  non-
genuine  lamps  may  affect  projection  quality  and  safety.  Any  damage  or
malfunction  caused  by  the  use  of  non-genuine  lamps  may  not  be  covered  by
Epson's  warranty.
a
We  recommend  that  you  clean  the  air  filter  whenever  you  replace  the
lamp.
s
How  to  Replace  the  Lamp
The  lamp  can  be  replaced  even  when  the  projector  is  suspended  from  a  wall
or  ceiling.
Replacing Consumables
166