Epson EB-1975W User Manual

Page of 200
You  can  set  up  the  projector  to  send  you  an  e-mail  alert  over  the  network  if
there  is  a  problem  with  the  projector.
If  you  set  the  Standby  Mode  setting  to  Communication  On  in  the
projector's   ECO  menu,  you  can  receive  the  e-mail  alerts  even  if  the
projector  is  in  standby  mode  (when  the  power  is  off).
a
Press  the  [Menu]  button  on  the  control  panel  or  remote  control.
b
Select  the  Network  menu  and  press  [Enter].
c
Select   Network  Configuration  and  press  [Enter].
d
Select  the  Mail  menu  and  press  [Enter].
e
Set  the  Mail  Notification  setting  to  On.
f
Enter  the  IP  address  for  the  SMTP  Server  option.
a
Do  not  use  these  addresses:  127.x.x.x  or  224.0.0.0  through
255.255.255.255  (where  x  is  a  number  from  0  to  255).
g
Select  a  number  for  the  SMTP  server  Port  Number,   from   1   to
65535  (default  is  25).
h
Choose  an  Address  field,  enter  the  e-mail  address,  and  select  the
alerts   you   want   to   receive.   Repeat   for   up   to   three   addresses.
a
Your  e-mail  address  can  be  up  to  32  alphanumeric  characters
long.
i
When  you  finish  selecting  settings,  select  Complete  and  follow  the
on-screen  instructions  to  save  your  settings  and  exit  the  menus.
a
If  a  critical  problem  causes  a  projector  to  shut  down,  you  may  not
receive  an  e-mail  alert.
Related  Links
Network Projector E-mail Alert Messages
When  a  problem  occurs  with  a  projector  on  the  network,  and  you  selected
to  receive  e-mail  alerts,  you  receive  an  e-mail  containing  the  following
information:
• Address  for  Address  1  as  the  mail  sender
• Epson  Projector  in  the  subject  line
• The  name  of  the  projector  experiencing  a  problem
• The  IP  address  of  the  affected  projector
• Detailed  information  about  the  problem
Setting Up Projector Network E-Mail Alerts
119