Epson EB-1420Wi User Manual

Sub-menu

Function

Web Server Cer‐
tificate

(This item can only be set when Secure HTTP is set to On.)
The Issued to, Issued by, and Validity period information on
the certificate set in the projector is displayed. This information
is not displayed when a Self-signed Certificate is set.
Select Clear to delete the stored certificate.

a

• Web  Control  is  used  to  set  certificates.

s

• You can  also install digital certificates on the projector from a  USB

storage  device.  However,  if  you  install  a  certificate  from  both  a  USB
storage  device  and  the  network,  it  may  not  be  installed  correctly.

SNMP  menu

Sub-menu

Function

SNMP

Set to On to monitor the projector using SNMP

. To monitor

the projector, you need to install the SNMP manager program on
your computer. SNMP should be managed by a network
administrator. The default value is Off.

Sub-menu

Function

Trap IP Address
1/Trap IP Ad‐
dress 2

You can register up to two IP addresses for the SNMP trap
notification destination.
You can enter a number from 0 to 255 in each field of the address.
However, the following IP addresses cannot be used.
127.x.x.x, 192.0.2.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)

Community
Name

Set the community name of SNMP. You can enter up to 32 single-
byte alphanumeric characters (you can only use the @ symbol).

Resets  all  of  the  network  settings.

Sub-menu

Function

Reset network
settings.

To reset all of the Network settings, select Yes.
When you reset the network settings , the Passphrase,
Administrator Password and Manage Certificates menu settings
change back to their default values, and the certificates are
deleted.
After you reset all the settings, the Basic menu appears.