Epson EB-G5650W User Manual

Check  the  event  ID  and  perform  the  remedy  given  below.  If  the  problem  cannot  be  solved,  contact  the  network  administrator  or  one   of   the   following   contact
addresses.  

s

 

Event ID

Cause

Remedy

0432
0435

Failed to startup EasyMP Network Projection.

Restart the projector.

0434
0481
0482
0485

Network communication is unstable.

Check the status of network communications. Wait for a while and then try connecting again.

0433

An image that was transferred cannot be reproduced.

Restart EasyMP Network Projection.

0484

Communications was cut off from the computer.

04FE

EasyMP Network Projection ended unexpectedly.

Check the status of network communications. Restart the projector.

04FF

A system error occurred in the projector.

Restart the projector.

0891

The same SSID access point cannot be found.

Set the computer, the access point, and the projector to the same SSID.

0892

The WPA and WPA2 authentication methods are not the same.

Check the setting of wireless LAN security to see if it is correct. s Network Menu - Security
Menu 

0893

The WEP, TKIP, and AES encoding methods are not the same.

0894

Communications was cut off because a connection was made to the
wrong access point.

Check with the network administrator and follow their instructions.

0898

Failed to obtain the DHCP.

Check the DHCP server to see if it is operating correctly and check the LAN cable to see if it is
connected correctly. Turn off DHCP if it is not being used. s Network Menu - Wireless LAN
Menu 

, Wired LAN Menu 

0899

Other connection errors

If the problem cannot be solved by restarting the projector or EasyMP Network Projection, contact
one of the following contact addresses. s