Epson EB-1910 User Manual

Page of 62
Slideshow  lets  you  play  back  and  project  image  files  stored  on  USB
storage  devices  and  digital  cameras.
This  section  explains  the  basic  operations  for  Slideshow.
Although  the  following  steps  are  explained  based  on  the  Remote
Control,  you  can  perform  the  same  operations  from  the  projector’s
Control  panel.
Starting and Closing Slideshow
Starting  Slideshow
Procedure
A
Switch  the  projected  image  to  USB.
s
 
B
Connect  the  USB  storage  device  or  digital  camera  to  the
projector.
s
 
Slideshow  starts  and  the  file  list  screen  is  displayed.
Closing  Slideshow
Procedure
To  close  Slideshow,  disconnect  the  USB  device  from  the
USB(TypeA)  port  on  the  projector.  For  digital  cameras,  hard  disks,
and  so  on,  turn  off  the  power  to  the  device  and  then  disconnect.
q
• You  can  also  connect  a  memory  card  to  the  projector  by  loading
it  in  a  USB  card  reader.  However,  some  card  readers  may  not
be  compatible.
• When  the  following  screen  (Select  drive  screen)  is  displayed,
press  the  [
][
][
][
]  buttons  to  select  the  drive  you
want  to  use,  and  then  press  the  [Enter]  button.
• To  display  the  Select  drive  screen,  position  the  cursor  on  Select
drive
 in  the  top  half  of  the  file  list  screen,  and  then  press  the
[Enter]  button.
Slideshow Basic Operations
The  following  describes  the  procedures  for  playing  images  using
Slideshow,  and  projection  operations.
Procedure
A
Use   the   [
][
][
][
]  buttons  to  position  the
cursor  on  the  file  or  folder  you  want  to  access.
Slideshow Basic Operations
45