Epson EB-96W User Manual

• WPA

This  is  an  encryption  standard  that  improves  security  which  is  a  weak
point  of  WEP.  Although  there  are  multiple  kinds  of  WPA  encryption
methods,  this  projector  uses  TKIP  and  AES.
WPA  also  includes  user  authentication  functions.  WPA  authentication
provides  two  methods:  using  an  authentication  server,  or  authenticating
between  a  computer  and  an  access  point  without  using  a  server.  This
projector  supports  the  latter  method,  without  a  server.

a

For  setting  details,  follow  the  directions  from  the  network
administrator  of  your  network.

Submenu

Function

IP Settings

You can make settings related to the following addresses.
DHCP

: Set to On to configure the network using DHCP. If this

is set to On, you cannot set any more addresses.
IP Address

: You can input the IP address assigned to the

projector. You can input a number from 0 to 255 in each field of
the address. However, the following IP addresses cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)
Subnet Mask

: You can input the subnet mask for the projector.

You can input a number from 0 to 255 in each field of the address.
However, the following subnet masks cannot be used.
0.0.0.0, 255.255.255.255
Gateway Address

: You can input the IP address for the gateway

for the projector. You can input a number from 0 to 255 in each
field of the address. However, the following gateway addresses
cannot be used.
0.0.0.0, 127.x.x.x, 224.0.0.0 to 255.255.255.255 (where x is a
number from 0 to 255)