Epson EB-G5200W User Manual
Correcting Distortion in the Projected Image
18
C
Use the [h] button on the remote control or the
[
], [
], [
], and [
]
buttons on the
control panel to select the corner you want to adjust,
and then press the [Enter] button.
and then press the [Enter] button.
D
To adjust the shape, use the [h] button on the
remote control or the
remote control or the
[
], [
], [
], and
[
]
buttons on the control panel.
If the screen below is displayed during the correction, this means
that you have reached the correction amount limit.
that you have reached the correction amount limit.
E
Repeat procedures 3 and 4 as needed to adjust any
remaining corners.
remaining corners.
F
When you are done, press the [Esc] button to exit
the correction menu.
the correction menu.
Because the correction method was changed to "Quick Corner"
from "Keystone" in the Configuration menu, when
from "Keystone" in the Configuration menu, when
[
],
[
], [
], and [
]
buttons are pressed later, the
screen for selecting the corner in procedure 2 is displayed. Change
"Keystone" from the Configuration menu to "H/V-Keystone" if you
want to correct H/V-Keystone when pressing the
"Keystone" from the Configuration menu to "H/V-Keystone" if you
want to correct H/V-Keystone when pressing the
[
],
[
], [
], and [
]
buttons on the control panel.
q
If the [Esc] button is held down for about two seconds while
correcting with Quick Corner, the following screen is
displayed.
correcting with Quick Corner, the following screen is
displayed.