Epson EB-825 User Manual

q

The  following  screen  showing  the  status  of  image  signals  is
displayed  when  only  the  image  that  the  projector  is  currently
displaying  is  available,  or  when  no  image  signal  can  be  found.  You
can   select   the   input   port   where   the   equipment   you   want   to   use   is
connected.  If  no  operation  is  performed  after  about  10  seconds,  the
screen  closes.

USB  is  only  displayed  for  EB-826W/825/824/85.
LAN  is  only  displayed  for  EB-826W/825/85.

You  can  change  directly  to  the  target  image  by  pressing  the  following
buttons  on  the  Remote  Control.

Remote Control

A

Each time the button is pressed, the image changes from the Computer1
input port to the Computer2 input port.

B

Each time the button is pressed, the image changes from the Video input
port to the S-Video input port.

C

Each time the button is pressed, it changes to the image from equipment
connected to USB Display/USB port (TypeA). Only changes to USB
Display when using the EB-84.

D

When the projector is connected to a computer via a network, you can
switch to images projected from EMP NS Connection.(EB-826W/825/85
only)
When using EB-824/84, this does not function even if the button is pressed.