Epson EB-825 User Manual

The projector supports the following four different projection methods.
Install according to the conditions of the installation location.

Warning

•

A  special  method  of  installation  is  required  when  suspending  the  projector
from  a  ceiling  (ceiling  mount).  If  it  is  not  installed  correctly,  it  could  fall
causing  an  accident  and  injury.

•

If  you  use  adhesives  on  the  Ceiling  mount  fixing  points  to  prevent  the
screws  from  loosening,  or  if  you  use  things  such  as  lubricants  or  oils  on
the  projector,  the  projector  case  may  crack  causing  it  to  fall  from  its
ceiling  mount.  This  could  cause  serious  injury  to  anyone  under  the  ceiling
mount  and  could  damage  the  projector.
When  installing  or  adjusting  the  Ceiling  mount,  do  not  use  adhesives  to
prevent  the  screws  from  loosening  and  do  not  use  oils  or  lubricants  and  so
on.

Attention

Do not use the projector on its side. This may cause malfunctions to occur.

• Project images from in front of

the screen. (Front projection)

• Project images from behind a

translucent screen. (Rear
projection)

• Suspend the projector from the

ceiling and project images from in
front of the screen. (Front/Ceiling
projection)

• Suspend the projector from the

ceiling and project images from
behind a translucent screen. (Rear/
Ceiling projection)

• An optional Ceiling mount is required when suspending the

projector from a ceiling.
s

p.75

• You can change the setting as follows by pressing down the [A/

V Mute] button on the Remote Control for about five seconds.
FrontWFront/Ceiling
Set Rear or Rear/Ceiling from the Configuration Menu. s

p.39

Installation Methods