Epson 7850p User Manual

1

T

he EasyManagement software for your projector lets you monitor 

and control your projectors from a remote computer in several ways:

■

Use EMP Monitor to see your projectors’ status, switch image 
sources, and control basic settings.

■

Use the mail notification function to receive e-mail alerts about 
possible problems. 

■

Use a network management utility running SNMP, such as 
HP OpenView, to manage your facility’s equipment from a 
pre-existing system. 

You can also use NS Connection to register up to 16 projectors as a 
group. This allows you to provide quick and easy access to these 
projectors to other computers.

To use the EasyManagement software to manage your projectors, first 
install EMP Monitor as described in Appendix A. If you plan to create 
projector groups, also install EMP NS Connection. Then connect and 
configure each projector you want to monitor. You can connect the 
projector wirelessly in Access Point mode, as described on page 77, or 
over a wired network, as described on page 142. 

This chapter covers the following information:

■

Connecting the projector to and configuring it for a wired 
network

■

Monitoring and controlling your projector with EMP Monitor

■

Using e-mail alerts to warn you of problems

■

Understanding notification messages

■

Using a browser to monitor the projector

■

Using projector groups

If you’re using a network 
management utility running 
SNMP, you can configure 
your network to send trap 
alerts even without a plug-in 
(see page 142). This feature 
is intended for use by 
network administrators 
only.