Epson 7850p User Manual

Page of 224
Using the Remote Control
45
Use the 
 
pointer button to move the cursor on the screen.
Press the 
Enter
 button to left-click, or press it twice to 
double-click; press the 
ESC
 button to right-click.
To drag-and drop, hold down the 
Enter
 button for about one 
second until it lights. Then use the 
 
pointer button to drag the 
object. When it’s where you want it, press 
Enter
 to release it.
Use the 
Page 
buttons to move through a slideshow. 
Enabling Password Protection
To prevent unauthorized use, you can assign the projector a password. 
If you do, a screen will appear requesting the password whenever the 
projector is plugged in. If an incorrect password is entered three times 
in succession, the projector’s operation is locked and the power cord 
must be disconnected and reinserted to redisplay the password screen. 
If an incorrect password is entered nine times in succession, the user 
must contact the dealer to unlock the projector.
The default setting for the Password Protect function is off. Follow 
these steps to turn password protection on:
1. Press the 
Freeze
 button on the remote control for about five 
seconds.
Page up or down 
to change slides 
in PowerPoint
note
It’s a good idea to write your 
password down. Also, make 
a note of the “Request 
Code: xxxxx” number that 
appears in the Password 
Protect Release screen. If you 
do forget the password, you’ll 
need this code when you 
contact the dealer.
If you leave the projector 
plugged in, the Password 
Protect Release screen will 
not appear. You only need a 
password if you unplug and 
reconnect the power cable.