Epson 7850p User Manual

1. Locate a component video cable (one may be included with your 

video equipment). 

Look at the connectors at one end of the cable. If they are 
bayonet-style (BNC) connectors, continue on to the next step. If 
they are RCA-style connectors, you’ll need to attach commercially 
available BNC adapters to plug the cable into your projector.  

2. Connect the cable to your player and the cable (with the adapters) 

to the 

BNC

 connectors on the projector. Match the Y/Cb/Cr (or 

Y/Pb/Pr) connectors on your player to the corresponding 
connectors on the projector.

3. If you want to play sound through the projector, see page 65 for 

instructions on connecting an audio cable.

4. If you don’t need to make any other connections, see Chapter 1 

for instructions on turning on the projector and adjusting the 
image. Once the projector is turned on, do the following:

■

Enter the projector’s Setting menu, then change the BNC 
Input setting to 

YCbCr

 or 

YPbPr

, as needed (see page 137).

■

After exiting the menu system, press the remote control’s 

BNC

 button or repeatedly press the projector’s 

Video/BNC

 

button to select 

BNC

 as the image source. 

BNC adapters