Epson EMP-S3 User Manual
68
Glossary
Squeeze mode
In this mode, wide-screen images in 16:9 mode are compressed in the horizontal direction so that they are stored on the
recording medium as 4:3 images.
When these images are played back by the projector in squeeze mode, they are restored to their original 16:9 format.
recording medium as 4:3 images.
When these images are played back by the projector in squeeze mode, they are restored to their original 16:9 format.
sRGB
An international standard for colour intervals that was formulated so that colours which are reproduced by video equipment
can be handled easily by computer operating systems (OS) and the Internet. If the connected source has a sRGB mode, set
both the projector and the connected signal source to sRGB.
can be handled easily by computer operating systems (OS) and the Internet. If the connected source has a sRGB mode, set
both the projector and the connected signal source to sRGB.
SVGA
A type of video signal with a resolution of 800 (horizontal)
× 600 (vertical) dots which is used by IBM PC/AT-compatible
computers.
S-Video
A video signal which has the luminance component and colour component separated in order to provide better image quality.
It refers to images which consist of two independent signals: Y (luminance signal), and C (colour signal).
It refers to images which consist of two independent signals: Y (luminance signal), and C (colour signal).
SXGA
A type of video signal with a resolution of 1280 (horizontal)
× 1024 (vertical) dots which is used by IBM PC/AT-compatible
computers.
Sync (synchronisation)
The signals output from computers and RGB video equipment have a specific frequency. If the projector frequency does not
match this frequency, the resulting images will not be of a good quality. The process of matching the phases of these signals
(the relative position of the crests and troughs in the signal) is called "synchronisation". If the signals are not synchronized,
problems such as flickering, blurriness and horizontal interference can occur.
match this frequency, the resulting images will not be of a good quality. The process of matching the phases of these signals
(the relative position of the crests and troughs in the signal) is called "synchronisation". If the signals are not synchronized,
problems such as flickering, blurriness and horizontal interference can occur.
Tracking
The signals output from computers and RGB video equipment have a specific frequency. If the projector frequency does not
match this frequency, the resulting images will not be of a good quality. The process of matching the frequency of these
signals (the number of crests in the signal) is called "tracking". If tracking is not carried out correctly, wide vertical stripes will
appear in the projected images.
match this frequency, the resulting images will not be of a good quality. The process of matching the frequency of these
signals (the number of crests in the signal) is called "tracking". If tracking is not carried out correctly, wide vertical stripes will
appear in the projected images.
USB
An abbreviation for Universal Serial Bus. USB is an interface for connecting personal computers to peripheral devices which
only support relatively low data transmission speeds.
only support relatively low data transmission speeds.
VGA
A type of video signal with a resolution of 640 (horizontal)
× 480 (vertical) dots which is used by IBM PC/AT-compatible
computers.
XGA
A type of video signal with a resolution of 1024 (horizontal)
× 768 (vertical) dots which is used by IBM PC/AT-compatible
computers.