Epson EMP-1825 User Manual

There are four ways to correct distortion in projected images as below.

• Quick Setup

Press the [Quick Setup] button to fit on the screen at an aspect ratio 
of 4:3. 

• Auto V-Keystone

Tilt the projector vertically to automatically correct distortion in the 
vertical direction.

"Quick Corner" and "H/V-Keystone" are provided for manual 
correction. These two methods cannot be applied at the same time.
• Quick Corner

This allows you to manually correct each of the four corners of the 
projected image separately. Select "Settings" - "Keystone" - "Quick 
Corner" to use Quick Corner for correction.

• H/V-Keystone

This allows you to manually correct distortion in the horizontal and 
vertical directions independently.

The "Auto V-Keystone", "Quick Corner" and "H/V-Keystone" functions 
project a test pattern onto the screen to correct the projected image, 
so connection to a computer for preparing the projector is not required. 

Quick Setup automatically corrects distortion in the projected image, that 
occurs when the projector is installed at a tilt to the image projection 
surface, so that the image is projected at an aspect ratio of 4:3. In the case 
of a screen having an aspect ratio of 4:3, the projected image is corrected 
so that it fits perfectly in the screen.
Refer to Quick Start Guide for how to do the operation. When the results 
of the correction performed by Quick Setup not completely satisfactory, 
perform fine adjustment using H/V-Keystone. s

Here is how to fit the projected image within the screen.

q