Epson EMP-1825 User Manual

Items that can be set vary depending on the image signal currently being projected as shown in the following screen shots. Setting details are saved for each 
image signal.

Auto Setup

You can select whether, when the input signal changes, the image is automatically adjusted to the optimum state (On) or not (Off). s

Tracking

g

You can adjust computer images when vertical stripes appear in the images. s

Sync.

g

You can adjust computer images when flickering, fuzziness, or interference appear in the images. s

Position

You can adjust the display position up, down, left, and right when a part of the image is missing so that all of the image is projected. 

Progressive

g

(Component video can only be adjusted when 480i/576i signals are being input)
Off: IP conversion is carried out for each field in the screen. This is ideal for viewing images with a large amount of movement.
On: interlace

g

 (i) signals are converted into progressive (p) signals. This is ideal for viewing still images.

Computer1 Input

You can select the input signal from the Computer1 input port or Computer2 input port.  
If set to "Auto" the input signal is set automatically according to the connected equipment. 
If colors do not appear correctly when set to "Auto", select the appropriate signal according to the connected equipment. 

Computer2 Input
Video Signal

If set to "Auto", video signals are recognized automatically. If interference appears in the image or a problem occurs such as no image is being 
projected when set to "Auto", select the appropriate signal according to the connected equipment.

Resize

You can set the aspect ratio

g

 for projected images. s

Reset

You can reset all adjustment values on the "Signal" menu to their default settings, except for "Computer1 Input" and "Computer2 Input". 
To return all menu items to their default settings, see s

g

g

g