Epson EB-W9 User Manual
You can monitor and control the projector from a computer, via USB. This
is done by connecting the projector and the computer with a USB cable,
and entering communication commands (ESC/VP21 commands).
is done by connecting the projector and the computer with a USB cable,
and entering communication commands (ESC/VP21 commands).
Before You Begin
To monitor and control the projector with ESC/VP21 commands, the
following preparations must be carried out.
following preparations must be carried out.
Procedure
A
Install the USB communication driver (EPSON USB-COM Driver)
to your computer. For information about the EPSON USB-COM
Driver, contact your local dealer or the nearest address
provided in the Support and Service Guide.
to your computer. For information about the EPSON USB-COM
Driver, contact your local dealer or the nearest address
provided in the Support and Service Guide.
s
B
From the projector's Configuration menu, set "Extended" - "USB
Type B" to "Wireless Mouse" or "Page Up/Down".
Type B" to "Wireless Mouse" or "Page Up/Down".
C
Similarly, set "Link 21L" to "On" from Extended menu.
D
Connect the computer's USB port to the projector's USB(TypeB)
port with a USB cable.
port with a USB cable.
From second time on, start from step two.
Command List
When the power ON command is transmitted to the projector, the power
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
turns on and it enters warm-up mode. When the projector's power has
turned on, a colon ":" (3Ah) is returned.
When a command is input, the projector executes the command and
returns a ":", and then accepts the next command.
returns a ":", and then accepts the next command.
If the command being processed terminates abnormally, an error message is
output and a ":" is returned.
output and a ":" is returned.
Item
Command
Power ON/OFF
On
PWR ON
Off
PWR OFF
Signal selection
Computer
Auto
SOURCE 1F
RGB
SOURCE 11
HDMI (EB-W10/X10 only)
SOURCE 30
Video
SOURCE 41
S-Video
SOURCE 42
USB Display
SOURCE 51
USB (EB-W10/X10 only)
SOURCE 52
A/V Mute On/Off
On
MUTE ON
Off
MUTE OFF
A/V Mute selection
Black
MSEL 00
Blue
MSEL 01
Logo
MSEL 02
Add a Carriage Return (CR) code (0Dh) to the end of each command and
transmit.
transmit.
Monitoring and Controlling the Projector Using a Computer (ESC/VP21 Commands)
88