Epson EB-X24 User Manual

If  you  are  having  a  problem  with  the  projector,  first  check  the  projector's  indicators  and  refer  to  "Reading  the  Indicators"  below.

See  the  following  if  the  indicators  do  not  show  clearly  what  the  problem  might  be.

s

The  projector  is  provided  with  the  following  four  indicators.  The  color  and  lit  status  of  the  indicators  shows  the  status  of  the   projector.

A

Power  indicator

Indicates  the  projector's  status.

B

Status  indicator

Indicates  the  projector's  status.

C

Lamp  indicator

Indicates  the  projection  lamp  status.

D

Temp  indicator

Indicates  the  internal  temperature  status.

Indicators

Status

Explanation

Power supply

Status

 Blue - Lit

 Off

Standby condition

Power is being supplied to the projector. When the [t] power button is pressed in this condition, projection
starts.

Network monitoring
status

The projector is being monitored and controlled over a network (when Standby Mode is set to
Communication On

). If the power cord is disconnected and connected in this status, the power indicator

flashes blue.

 Blue - Lit

 Blue - Flashing Warm-up status

This is the status immediately after turning on the projector. Warm-up takes approximately 30 seconds after
the lamp turns on. In this status you cannot turn off the projector, even if you press the [t] power button.