EIKI LC-XB200 User Manual

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA

or UXGA with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this

projector automatically detects the signal format and tunes to project a proper image without any additional

settings. (Signal formats provided in this projector are shown on pages 73-74.)

One of the following messages may appear when:

The projector cannot recognize the connected

signal conforming to the provided PC Systems.

Auto is displayed on the System Menu box

and the Auto PC Adjustment function works

to display proper images. If the image is not

projected properly, a manual adjustment is

required (pp.33-34).
There is no signal input from the computer.

Check the connection between your computer

and the projector. (See “Troubleshooting” on

p.67.)

The preset system is manually adjusted in the

PC adjust Menu. The adjusted data can be

stored in

Mode 1–5 (pp.33-34).

PC Systems provided in this projector is chosen.

The projector chooses a proper system provided

in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

PC system can also be selected manually.

Press the MENU button to display the On-Screen

Menu. Use the Point

ed

buttons to select

Input and

then press the Point

8

or the SELECT button.

Use the Point

ed

buttons to select

System and then

press the Point

8

or the SELECT button.

Use the Point

ed

buttons to select the desired system

and then press the SELECT button.

RGB(PC digital)

The PC System Menu

Selected system is

displayed.

RGB(Computer 1)

Systems in this dialog box

can be selected.

Customized

(1–5) set in the

PC adjust Menu

(pp.33-34).