EIKI LC-XB200 User Manual

Turn  off  the  projector,  and  unplug  the AC  power  cord

from the AC outlet.
Turn the projector over and remove the filters .

Filter prevents dust from accumulating on the optical elements inside the projector. Should the filters become

clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup

and adversely affect the life of the projector. If a “Filter warning” icon appears on the screen, clean the filters

immediately. Clean the filters by following the steps below.

Clean the filters softly by using a brush.

Replace the filters properly. Make sure that the filters

are fully inserted to the projector.

Do not operate the projector with the filters

removed. Dust may accumulate on the optical

elements degrading picture quality.

Do not put anything into the air vents. Doing so

may result in malfunction of the projector.

 When using the projector under dusty or smoky conditions,

dust may accumulate on a lens, LCD panels, or optical

elements inside the projector degrading the quality of a

projected image. When the symptoms above are noticed,

contact your authorized dealer or service station for proper

cleaning.

✔ 

  When reinserting this

filter, be sure that the

slit part is facing the

outer side.

Be sure to reset the Filter counter after cleaning or replacing

the filters.

Press the MENU button to display the On-Screen

Menu. Use the Point

ed

buttons to select the

Setting

and then press the Point

8 or SELECT

buttons.

Use the Point

ed

buttons select

Filter counter and

then press the Point

8 or

SELECT button. Use the

Point

ed 

buttons to select

Filter counter reset and

then press SELECT button. The

Filter counter Reset?

appears. Select

yes to continue.

The

Reset? appears.
Select

yes, then

another confirmation

box appears.

Select

yes again

to reset the Filter

counter.

Another confirmation dialog box appears, select

yes to

reset the Filter counter.

Filters.