Garmin 74C User Manual

If your video source has component video connectors, you can use 
them to project a higher quality video image. You’ll need a 
component video cable, which can be purchased from EPSON 
(ELPKC19). See page 12.

Before starting, make sure the projector and your DVD player or 
other video device are turned off.

1. Connect the large end of the component video cable to the 

projector’s 

Computer1/Component Video1

 or the 

Computer2/Component Video2

 port. 

2. Insert the three ends of the component video cable into the 

R

, 

G

, and 

B

 ports on your video source.

3. Connect the audio plugs on the RCA A/V cable as described on 

4. Once the projector is turned on, be sure to:

■

Select the correct source to see your image: 

Component 

Video1 (YCbCr), Component Video1 (YPbPr)

, 

Component Video2 (YCbCr)

, or 

Component Video2 

(YPbPr)

. See page 50.

■

Open the projector’s Image menu and select the correct 

Input Signal

 setting to match your device and the port you 

used: 

Component Video1 (YCbCr), Component Video1 

(YPbPr),

 

Component Video2 (YCbCr), 

or 

Component 

Video2 (YPbPr)

. See page 50.