Garmin 74C User Manual

If the password is not correct, you see the message “Wrong password. 
Please try again.” If you enter an incorrect password three times in 
succession, you see the message “The projector’s operation will be 
locked. Request code xxxxx” and the projector switches to standby 
mode for approximately 5 minutes. Write down the request code. 
Then disconnect the projector’s power cord from the electrical outlet, 
reconnect it, and turn the projector back on. 

When you see the Password Protect Release screen again, you can try 
to enter the correct password.

If you have forgotten the password, contact EPSON with the request 
code number that appears in the Password Protect Release screen for 
assistance. See “Where To Get Help” on page 83.

If you enter an incorrect password nine times in succession, the 
projector remains locked and you must contact EPSON to unlock it. 

The Reset All option lets you return the projector settings to their 
default values.

Select 

Reset All

 and press the 

Enter

 button on the remote control to 

display the confirmation screen. Select 

Yes

 to reset all the default 

settings or 

No

 to cancel.

Reset All