JVC DLA-X70R User Manual

Page of 289
24
Preparation
2
About installation (Continued)
Fixation of the projector
Measures to prevent the unit from toppling or dropping should be taken for safety reasons and 
accident prevention during emergencies including earthquakes.
When mounting this unit on a pedestal or ceiling, remove the 4 feet on the bottom surface and 
use all the 4 screw holes (M5 screws) to mount.
Ceiling
 
Bottom Surface
Air inlets
4 locations
Precautions for Mounting
  Special expertise and techniques are required for 
mounting this unit. Be sure to ask your dealer or a 
specialist to perform mounting.
 
Depth of the screw holes (screw length) is 23 
mm. Use screws shorter than 23 mm but longer 
than 13 mm. 
Using other screws will result in 
malfunctioning or cause the unit to drop.
 
When mounting to a pedestal, ensure 
sufficient space (foot height of 10 mm or 
higher) around the unit so that the air inlets 
are not blocked.
 
Do not tilt this unit more than ±5 degrees 
from side to side when using.
  Regardless whether the unit is still under 
guarantee, JVC is not liable for any product 
damage caused by mounting the unit with non-
JVC ceiling fittings or when the environment is 
not suitable for ceiling-mount.
 
When using the unit hanging from a ceiling, 
pay attention to the surrounding temperature. 
When a heater is in use, temperature around 
the ceiling is higher than expected.