JVC DLA-SH4K User Manual

Page of 48
8
Getting Started
Burning-in of D-ILA Device
oDo not allow the same still picture to be 
projected for a long time or an abnormally 
bright video image to be projected
Do not project still images with a high brightness or 
high contrast on the screen for a long time. This 
video image could be burnt into the D-ILA device.
Pay special attention when projecting video games and 
computer program images.
Motion images such as normal video playback images 
do not pose the burning-in problem.
Viewing Conditions (Brightness 
of Room)
oBrightness of the room
Avoid direct exposure of screen to direct sunlight 
and lights such as by using a curtain. Images can be 
well projected by darkening the brightness of the 
room.
oDo not view screen for prolonged hours
Looking at the screen continually for a prolonged 
time is tiring to the eyes. Allow your eyes to rest at 
intervals.
oDo not use this unit when image flickers
due to installation conditions and environment. This 
may cause your eyesight to deteriorate.
Environment of Use
oDo not use this projector in rooms with 
cigarette smoke or oily smoke
Do not use this projector in rooms with cigarette 
smoke or oily smoke. This may cause the unit to 
malfunction.
oWhen mounting this projector to the ceiling
Check the temperature around the projector unit.
When a heater is in use, the ceiling may reach a 
temperature higher than anticipated, hence leading 
to malfunction of the unit.
Maintenance Procedures
oClean dirt on the cabinet
with a soft cloth. In case of heavy soiling, soak a 
cloth in neutral detergent diluted with water, wring 
dry and wipe, followed by wiping again using a dry 
cloth.
oPay attention to the following to prevent the 
cabinet from deteriorating in condition, 
getting damaged, or the paint from coming 
off.
● Do not wipe with a stiff cloth
● Do not wipe with force
● Do not wipe with thinner or benzene
● Do not spray volatile chemicals like insecticide
● Do not allow prolonged contact with rubber or plastic 
products
oClean dirt on the lens
using commercial blowers or lens cleaning papers 
(for cleaning glasses and cameras).
Do not use fluid-type cleaning agents. This may lead to 
peeling of the surface coating film.
Lens surface is fragile. Avoid rubbing it hard or 
knocking it.
Precautions During Use
Gauging replacement time of components
This product comes with replacement components required for maintaining the functions of this product, such as 
optical components, cooling fan and filters. The timing for replacing components varies considerably according to 
the frequency and environment of use. For details on replacement of components (except filters), please consult 
any nearby JVC servicing center.
DLA-SH4_EN.book  Page 8  Tuesday, January 15, 2008  6:07 PM