JVC DLA-M5000SCE User Manual

Connecting to Various Devices 

DLA-M5000CLE (Re)/ LCT0979-002A / ENGLISH

After all devices have finished being connected, connect the projector’s power cord. At this time, do not turn on the MAIN 
POWER switch yet.

■ Preparation

Attach a plug which matches your wall outlet, to the power 
cord. For how to attach a plug, consult your dealer or a 
local service center.

1 Insert the supplied power cord into the 

The cover is a screwed type. Turn the cover in the 
direction of the arrow to remove.

cord into the power input terminal of the projector.
Align the groove on the projector plug of the power 
cord with the claw on the power input terminal of the 
projector, and push the plug in firmly.
After that, turn the ring on the plug in the direction of 
the arrow to fix.

2 Insert the plug of the supplied power cord 

• Since the power requirement of the projector is high, be 

sure to insert the power plug directly into a wall outlet.

• This projector requires a single phase, 3-wire, 200V ~ 240V 

wall outlet.

■ To use the projector

• Be sure to remove the cap; otherwise, it may be deformed 

(or degraded in quality) or melted, possibly causing a fire or 
malfunction.

To prevent fire and electric shock, observe the 
following:
• When you do not use devices, pull out their power cords 

from wall outlets.

• Do not connect the devices with power cords other than 

supplied.

• Do not use voltage other than the power voltage indicated.
• Do not scar, damage, or work on the power cords. Also, do 

not put a heavy object on, heat or pull the power cords, 
otherwise they may be damaged.

• Do not insert or pull out the plugs with a wet hand.

Lens cap

DLA-M5000LE&SCE Eng Re.book  Page 22  Tuesday, March 12, 2002  3:59 PM