Hitachi CP-X268AWF User Manual

10

Adjusting the projector's elevator

CAUTION

Ź,I\RXSUHVVWKHHOHYDWRUEXWWRQZLWKRXWKROGLQJWKHSURMHFWRU

WKHSURMHFWRUPLJKWFUDVKGRZQRYHUWXUQVPDVK\RXU¿QJHUVDQGSRVVLEO\
result in malfunction. To prevent damaging the projector and injuring yourself, 
always hold the projector whenever using the elevator buttons to adjust the 
elevator feet.
ŹDo not incline the projector rightward or leftward. Also do not incline it 
backward or forward exceeding 30 degrees. Exceeding these range could 
cause malfunction, and could shorten the lifetime of the consumables.
Ź([FHSWIRULQFOLQLQJE\WKHHOHYDWRUIHHWDGMXVWPHQWSODFHWKHSURMHFWRU
horizontally.

You can use the elevator feet to make adjustments if the surface on which you 
need to set the projector is uneven or if you otherwise need to adjust the angle of 
projection. The adjustment range of the elevator feet is 0 to 9 degrees.

1.

After making sure that the projector is cool adequately, press and hold in the 
elevator buttons while holding the projector.

   The elevator buttons and the elevator feet are on the both sides.

2.

Raise or lower the projector to the desired height and release the elevator 
buttons.

   When you release the elevator buttons, the elevator feet will lock into position.

3.

,IQHFHVVDU\\RXFDQDOVR¿QHO\DGMXVWWKHKHLJKWRIWKHSURMHFWRUE\WZLVWLQJ
the elevator feet by hand.

Setting up

Elevator feet

Elevator button