Hitachi CP-X940W/E User Guide
13
ENGLISH
7
Press the INPUT button or the INPUT SELECT (VIDEO or
RGB) button to select the source of the signal to be projected
on the screen.
RGB) button to select the source of the signal to be projected
on the screen.
• The selected signal input is displayed at the bottom right of the screen
for 3 seconds.
Power on all connected equipment.
The method of connecting various equipment, see on the page 20~28.
Turn the MAIN POWER switch of the projector on.[ I : ON]
• The ON indicator will light up orange.
1
Press the STANDBY/ON button.
• The ON indicator blinks (green) during warm-up and then lights (green).
• Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
• Power cannot be turned on even if the STANDBY/ON button is pressed within 60 seconds after
power is turned off, since the lamp has cooled preparing for next lighting.
2
Adjust picture size using the projection lens ZOOM knob.
4
Adjust focus using the projection lens FOCUS ring.
5
6
6
Example on-screen display
Basic operations
3
Remove the lens cap.
RGB1
To project the picture
4
5
7
2
1
2
3
STANDBY/ON
MUTE
POSITION ON
OFF
FREEZE
LASER
RESET
MOUSE ON
BLANK
TIMER
RGB
VIDEO
INPUT
MENU ON
RIGHT
VOLUME
MAGNIFY
7
RESET
MENU
MUTE
INPUT
STANDBY/ON