Kensington MP-700 User Manual

■ Projection Distance and Projected Image Size

Use the following diagrams to determine the projected image size and the type of screen
required for any given projector location.

• The projection distance that provides good focusing is 1.4 m (1.5 yd) to 13 m (14 yd) from

the front of the lens. Install the projector within this range.

Installation location
• Do not install the projector in excessively hot or cold locations. The ambient temperature should be within 0°C to

35°C (32°F to 95°F).

• Position the projector so that the screen does not directly receive sunlight or other light from other lighting.

Otherwise, the projected image becomes white and is difficult to view. In a bright room, use a curtain or other
means to darken the area around the screen.

• Do not install the projector where it will be subject to excessive humidity, dust, or cigarette smoke.

Otherwise, image quality may deteriorate as dirt builds up on the lens, mirrors and other optical components.

• Do not install the projector in a small room with poor air circulation or any place where the air vents may be

blocked. Temperature build-up inside the projector may result in fire or a failure. (Vents are located on the bottom
and right side of the projector.)

Horizontal

Dimension

Vertical

Dimension

Projected Image Size

508 x 381

610 x 457

406 x 305

305 x 229

203 x 152

102 x 76

(cm)

250

300

200

150

100

50

(inch)

Width x Height

1

3

5

7

9

11

13

15 (m)

Projected Image Size

Projection Distance

Projection Distance

(1.43 m to 14.86 m/1.5 yd to 16.2 yd)

Wide

Tele

Wide: The largest

image that can be
projected by
adjusting the
image with the
zoom lens.

Tele: The smallest

image that can be
projected by
adjusting the
image with the
zoom lens.

 Cha.03

04.7.29, 11:45 AM

19