Infocus IN3100 Leaflet

S-Video Cable

Connect the power cord to the projector

and to an electrical outlet

Turn on the projector

Wait for the lamp to warm up

Turn on computer or other source

Change source if needed

The power light on the projector will light amber.

Touch the power light (or press power on the remote).
The power light will start blinking green.

After a few seconds, the power light will stop blinking and
turn green. It can take a minute for the lamp to reach
full brightness.

If needed, press source (on the projector or remote) to view
the source. You may have to press it more than once.

You may need to press a specific key combination to activate
your laptop's external video port. On most laptops, hold down
the FN key while pressing a key labeled CRT/LCD, LCD/VGA,
a monitor icon , or similar. Key combos for popular models:

Warning: Do not look directly into the lens
while the projector is being used.

Important: If there is still no video, restart your
computer (first make sure it's connected to the
projector and the projector is turned on).

Apple F7
Dell Fn+F8
Fujitsu Fn+F10

Sony Fn+F7
Toshiba Fn+F5

HP/Compaq Fn+F4 or Fn+F6
IBM ThinkPad Fn+F7

Turn on projector and source

Unpack the box

Here's what's included:

Put batteries in the remote

The remote uses 2 AA batteries.

Connect source

Color-coded connections make it easy.

You can connect more than one source if needed.

Projector

Computer Cable

Save the box and packing materials.

Remote

Power Cable

The top of your projector includes
a convenient indicator panel with
symbols that light up to show
important status.

For details, see Troubleshooting.

USB Cable

Regulatory model M3100

Status Indicator Panel

T U R N O V E R

Slide open the lens cover

Please read the safety instructions booklet

before setting up the projector.

Audio Out

L R

Video

Out

HDMI

Out

Carry Case

Connect to:

Computer (using DisplayLink)

USB Cable (included)

Computer

For Windows and Macintosh

Connect the USB cable between your
computer and the projector's DisplayLink
connector. See the DisplayLink Software
User's Guide for details on setup,
compatibility, features, and
troubleshooting; download it at
www.infocus.com/support/displaylink

Computer Cable (included)

Computer

Connect to:

DVD, VCR

Connect video using an

HDMI cable

or a

Composite Video cable

www.infocus.com/store part no. SP-HDMI-10M-R or SP-CPSTVID-5M or SP-SVIDEO-10M

Connect audio using a

Mini Plug Audio Y-Cable

(not needed for HDMI)

Available from A/V dealer or retailer

Got an Apple computer?

You may need an adapter. For more
information, see How-To Guides at
www.infocus.com/support/howto

Connect to:

Other kinds of sources

How-To Guides are available at www.infocus.com/support/howto

Connect to:

Computer (using VGA)

Power/Standby

Service Required

High Temperature

Replace Lamp

5-10 sec.

source

S-Video

Out

or an

S-Video cable

Please dispose of batteries in an environmentally proper manner.

Buy a Full-Featured Remote and Other Custom Accessories

www.infocus.com/store

Complete laptop activation chart at www.infocus.com/support

Quick Start Guide English
For other languages, see booklet

–

Français – voir la brochure
Deutsch – siehe Broschüre
Español – ver folleto
Italiano – vedi opuscolo
Nederlands – zie boekje
Português – consulte livreto
Svenska – se häftet
Русский – см. буклет

한국어 – 소책자 참조

Mini Plug Audio Y-Cable

(not needed for HDMI)

Composite Video Cable

HDMI Cable

DVD or VCR*

 Best

 Good

*Also for game console, cable box,
HDTV Receiver

010-0736-00

*010-0736-00*

 Better