Infocus IN5552L User Manual
23
Using the menus
To open the menus, press the Menu button on the keypad or remote. Use the left
and right arrow buttons to move between the menus, and the up and down to
navigate to the desired menu item.
and right arrow buttons to move between the menus, and the up and down to
navigate to the desired menu item.
Once a menu item is highlighted, the left and right arrow buttons can be used to
adjust the value, select an option, turn the feature on or off, or enter a submenu.
adjust the value, select an option, turn the feature on or off, or enter a submenu.
Press the Exit button to exit the menu system immediately or press the Menu
button to go back to the main menu bar and ultimately close the menus.
button to go back to the main menu bar and ultimately close the menus.
The menus are grouped by usage:
•
The Input menu provides source specific selection and adjustments.
•
The Picture menu provides common image adjustments.
•
The Lamps menu provides lamp selection and power adjustments.
•
The Alignment menu provides installation specific adjustments.
•
The Control menu provides set-up type adjustments that are not changed
often.
often.
•
The Service menu provides information about the projector and source.
Menu navigation
buttons
INPUT
PICTURE
LAMPS
ALIGNMENT
CONTROL
SERVICE
Mode
<
High Bright >
Power
<
Eco
>
High Altitude
< Off
>
Custom Power Level
<
Off
>
Lamp 1 Status
Off
Lamp 2 Status
On
Lamps menu
Alignment menu
INPUT
PICTURE
LAMPS
ALIGNMENT
CONTROL
SERVICE
Projection Mode
< Front >
Fan Mode
< Normal >
Lens Control
Enter
Lens Memory
Enter
Center Lens
Execute
Warp
Enter
Blanking
Enter
Edge Blend
Enter
INPUT
PICTURE
LAMPS
ALIGNMENT
CONTROL
SERVICE
Eco Network Power < Standard >
Auto Power Off
< Off
>
Auto Power On
< Off
>
Projector Control
< Network >
Network
Enter
Start Up Logo < On
>
Trigger
< Auto >
Auto Search
< Off
>
Dynamic Black
< Off
>
Language
Enter
Control menu
INPUT
PICTURE
LAMPS
ALIGNMENT
CONTROL
SERVICE
Model :
IN5552L
Serial Number :
C277XXXX00807
Software Version :
ME01-GE02-Ub02-5050-39-DPNE02-P03-E07
Active/PiP Source :
VGA
/ Off
Pixel Clock :
83.51 MHZ
Signal Format :
1280x800@60Hz
H/V Refresh Rate :
H: 49.726 KHZ V: 60 HZ
Lamp 1 Time :
5 HRS
Lamp 2 Time :
3 HRS
Power On Time :
5 HRS
Blue Only
<
Off >
Factory Reset
Enter
Service menu
INPUT
PICTURE
LAMPS
ALIGNMENT
CONTROL
SERVICE
Picture Mode
< High Bright >
Contrast
< 100
>
Brightness
< 100
>
Adaptive Contrast
< Off
>
Saturation
< ------
>
Hue
< ------
>
Gamma
< Video
>
Color
< Enter
>
Sharpness
< 0
>
Noise Reduction
< 0
>
Aspect Ratio
< 16:10
>
Overscan
< Off
>
VGA Setup
Enter
Auto Sync
Execute
INPUT
PICTURE
LAMPS
ALIGNMENT
CONTROL
SERVICE
Input Selection
Enter
PiP
Enter
Test Pattern
Enter
Color Space
< Auto
>
Input Lock
< Auto
>
Background
< Logo
>
Video Standard
< ------
>
Auto Sync Adjust
< Always
>
Picture Menu
Input menu