Infocus IN5552L User Manual

Page of 57
30
Using Projector Web Controls
Projector Web Controls allow you to configure and control a networked projector 
via a web browser. NOTE: Projector web pages are always displayed in English.
Configuring and Controlling the Projector via a Web Browser
Before using Projector Web Controls, your projector must be configured properly 
with your network. Consult your network administrator before connecting the 
projector to your network. Incorrect network configuration of the projector may 
cause problems on your network.
You can control the projector and make adjustments via the network using a web 
browser on a computer that is connected to the same network as the projector.
NOTES
The computer and projector must each have proper IP addresses, and must 
share the same subnet mask and gateway. The default IP address of the 
projector is 192.168.0.100. The network settings of the projector can only be 
changed via a web browser.
JavaScript must be enabled in your browser to use the projector web pages 
properly. If JavaScript is disabled, see the Help files for your web browser for 
details on how to enable it.
Projector Control in the projector’s Control menu must be set to Network. In 
order to have access to Projector Web Controls at all times, Eco Network 
Power in the Control menu must also be set to Standard.
Logging in
To log into Projector Web Controls, follow these steps:
1
Make sure the projector is connected to the network and connected to AC 
power.
2
Verify that the projector menu settings Control > Projector Control is set to 
Network.
INPUT   
PICTURE 
    
 
LAMPS 
      ALIGNMENT 
CONTROL
  
       SERVICE
Eco Network Power           <           Standard            >
Auto Power Off 
         <                Off  
          >
Auto Power On 
         <                Off  
          >
Projector Control  
         <           Network            >
Network 
 
 
            Enter
Start Up Logo                     <                On  
          >
Trigger  
 
         <                Auto             >
Auto Search   
         <                Off  
          >
Dynamic Black 
         <                Off  
          >
Language 
 
                          Enter
                                          Network
IP Address 
         172.20.10.11
Subnet Mask           255.255.255.00
Gateway 
         172.20.10.01
DHCP                      <                On  
          >
Control > Network submenu
3
Go to Control > Network and press the Enter button on the remote. The IP 
address will display on the left-hand side. Verify that the DHCP setting is set to 
ON. Note: If you change the DHCP setting to ON, you may need to exit and re-
enter the menu to see the IP address.
4
Open a web browser on your computer.
5
Enter the projector's IP address (preceded by http://) into the web browser's 
address bar. Example: If the IP address is 192.168.0.100, enter http://
192.168.0.100 into the browser's address bar. Note: If you don’t know the pro-
jector’s IP address, turn on the projector and review the network information 
in the Control > Network submenu.
6
The web user interface will open. The projector information will display.