Infocus IN5552L User Manual
5
Connector Panel
The projector provides both computer and video connection options, including:
•
HDMI
•
DVI-D
•
3G-SDI
•
BNC RGBHV and YPbPr for RGBHV, EDTV and HDTV
•
RGB (VGA) computer
•
S-video
•
Composite video
The projector also provides the following connectors:
•
LAN port for network control and web server.
•
12V screen trigger output
•
Wired remote jack
•
RS-232 connector for serial control. Command control codes are in the
Appendix and on our support website at www.infocus.com/support.
Appendix and on our support website at www.infocus.com/support.
12V Screen Trigger output
The 3.5mm mini-jack screen trigger provides a 12 volt, 0.25 amp DC output. It
turns on when the lamp is lit. If you connect your projection screen to this output
using the cable that came with your screen, the screen will move down when the
lamp is turned on and return to its storage position when the lamp is turned off.
turns on when the lamp is lit. If you connect your projection screen to this output
using the cable that came with your screen, the screen will move down when the
lamp is turned on and return to its storage position when the lamp is turned off.
RS-232
12V Screen Trigger
Output
Output
Composite
video
RGBHV
YPbPr
HDMI
DVI-D
S-video
RGB
(VGA)
Wired
remote
LAN
SDI