Infocus IN5554L User Manual

You can connect video devices such as VCRs, DVD players, camcorders, digital 
cameras, video game consoles, HDTV receivers, and TV tuners to the projector. 
Note: This projector does not support audio. You must connect audio directly from 
your source to a stereo or home theater system.

You can connect the projector to most video devices that can output video. You 
cannot directly connect the coaxial cable that enters your house from a cable or 
satellite company; the signal must pass through a tuner first. Examples of tuners 
are digital cable boxes, VCRs, digital video recorders, and satellite TV boxes. 
Basically, any device that can change channels is considered a tuner.

Although the aspect ratio is automatically selected by the projector based on the 
signal input, you can change the aspect ratio, if desired. The projector’s Aspect 
Ratio setting is accessed through the Aspect button on the remote or through the 
projector’s Picture Menu. See page 25 for more information.

No video cables are provided with the projector. You can order cables from InFocus 
or use your own.

HDMI is a standard, uncompressed, all-digital audio/video interface. HDMI 
provides an interface between sources, such as set-top boxes, DVD players, and 
receivers and your projector. Plug an HDMI cable into the video out connector on 
the video device and into the HDMI connector on the projector.

To take advantage of HDMI 1.3 Deep Color (30 bit) you must have a 1.3-compatible 
source.

Connect a BNC coaxial cable into the video device. Plug the other end of the cable 
into the SDI In connector on the projector.

Plug a BNC type component cable into the video device. Plug the other end of the 
component cable into the YPbPr connectors as appropriate. 

In addition, a Component to VGA adapter can be used in conjunction with the VGA 
connectors. Plug the component cable into the video device. Plug the other end of 

the component cable into the adapter and plug the adapter into the RGB 
connector.

Component offers the highest quality analog video output.

If your video device uses a round, four-prong S-video connector, plug an S-video 
cable into the S-video connector on your video device and into the S-video 
connector on the projector. 

S-video delivers higher quality video output than composite.

Plug the composite video cable’s yellow connector into the video out connector on 
the video device. Plug the other yellow connector into the yellow Video 

connector on the projector.
Composite Video output from composite connections is not as high quality as S-
video or as Component.

If your video device has a 15-pin VGA output, plug one end of the included 
computer cable into the VGA connector on your video source. Plug the computer 
cable into the RGB connector on the projector.

Connect one end of a BNC coaxial cable into the SDI Out connector on the 
projector and the other end into another projector to daisy-chain the projectors.