Infocus 210 User Manual

Turn on your computer. 

•

The computer image should display on the projection 
screen.

•

The computer source indicator LED displays a solid green 
indicating the computer source is active (Figure 22). 

•

If necessary, use the 

 buttons on the remote con-

trol or keypad to adjust the brightness. You can make fur-
ther adjustments to the image from the projector’s on-
screen menus. To open the menus, press the 

 button 

on the remote control or keypad. Then select the Display 
menu or the Image menu. For more information about the 
menus, see page 32.

•

If you don’t want to hear the sound from your computer or 
video player, press the 

 button. (Pressing 

 does 

not mute the microphone.)

If you want to turn off the projector for a short period of time, 
press the 

button on the remote control or keypad. This 

turns off the lamp but keeps the projector running. The power/
standby indicator LED (Figure 22) blinks green while the projec-
tor is in standby. To exit standby mode, press the 

button 

once. (It takes several seconds for the projection lamp to reach 
full power and project the image again.)

To completely power off the projector, press the “O” side of the 
power switch. If you want to turn the projector back on immedi-
ately, you must allow about 45 seconds for the lamp to cool. The 
lamp won’t light if it’s too hot.