Acer H5350 User Manual

18

English

Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions 

are not supported under DVI or Video mode.

Note: "Sharpness" functions is not supported under DVI and Computer 

mode.

Note: "Signal Type" function is only for HDMI or SCART connector.

Rear-Desktop

•

When you select this function, the projector reverses the image so 
you can project from behind a translucent screen.

Rear-Ceiling

•

When you select this function, the projector reverses and inverts 
the image at same time. You can project from behind a 

translucent screen with ceiling mounted projection.

H. Position 

(Horizontal 

position)

•

Press 

 to move the image left.

•

Press 

 to to move the image right.

V. Position 

(Vertical position)

•

Press 

 to move the image down.

•

Press 

 to move the image up.

Frequency

"Frequency" changes the projector's refresh rate to match the 

frequency of your computer’s graphics card. If you can see a vertical 

flickering bar in the projected image, use this function to make the 

necessary adjustments.

Tracking

Synchronizes the signal timing of the projector with the graphics card. 

If you experience an unstable or flickering image, use this function to 

correct it.

Sharpeness

Adjusts the sharpness of the image.

•

Press 

 to decrease the sharpness.

•

Press 

 to increase the sharpness.

Signal Type

Select signal type from RGB, YCbCr or YPbPr source.