SMART Technologies 4000I User Manual

40

To make the most of the 4000i’s high resolution display, set the resolution setting of any 
computer used with the 4000i to the optimal resolution of the projector, which is 1400 x 1050 
pixels. If the computer isn’t using this setting, the on-screen image may not properly fill the 
screen. However, if your computer can’t support this resolution, the projector will scale and 
display any resolution from 640 x 480 and higher. You should use a resolution setting as close 
as possible to 1400 x 1050.

Use the information here as a guideline when you adjust your computer. For precise 
instructions, read the documentation for your operating system. Also, if the image on the 
interactive whiteboard is too distorted to see, use a computer monitor to adjust this setting.

1. Select Start > Settings > Control Panel and then double-click Display.

2. In the Display Properties dialog box, click the Settings tab.

3. Move the slider to a pixel setting of 1400 x 1050 and then press OK.

1. Press the System Preferences icon in the Dock.

2. Press Displays.

3. On the Displays tab of the Monitors dialog box, select 1400 x 1050 and close the 

dialog box.

If you’re using a resolution other than the optimal setting of 1400 x 1050, you 
can adjust your computer’s refresh rate setting to improve image quality. This 
setting should be between 60 Hz and 85 Hz. When you adjust this setting, you 
should also use the projector’s Auto Adjust and Re-size buttons to help you 
get the best possible image.

The graphics card or the video driver of any computer connected to the 4000i 
should support a resolution of 1400 x 1050 pixels, or it must use graphics 
controller software that allows the computer to support this resolution. An 
example of a graphics card that supports this resolution is the NVIDIA card 
from NVIDIA Corporation, and an example of a graphics controller program is 
the PowerStrip application, which is available from EnTech Taiwan. 

While the projector in the 4000i supports other resolutions, if you use a lower 
resolution, you may not see the entire image, or the image may be too small to 
fill the screen, even with further adjustments.