Kodak KKA User Manual
SERVICE MANUAL
8
30APR96 – SM4530-1
Installing the MOTOR
Important
When installing the FAN and MECHANISM BELTS, install the MECHANISM BELT on the small MOTOR PULLEY,
and the FAN BELT on the large MOTOR PULLEY.
and the FAN BELT on the large MOTOR PULLEY.
[1] Do the replacement procedure for the MOTOR in reverse order.
Replacing the WORM PULLEY and MECHANISM BELT
Warning
Dangerous Voltage
[1] Disconnect the main power.
[2] Do the replacement procedure for the LOWER
HOUSING ASSEMBLY.
[3] Do the replacement procedure for the MOTOR
except do not disconnect the wires from the
MOTOR.
MOTOR.
[4] Remove the
Torx SCREW (on N.P. models) (or
Hex SCREW on Painted Models) from the WORM
PULLEY ASSEMBLY.
PULLEY ASSEMBLY.
[5] Move the TAB on the WORM PULLEY
ASSEMBLY out.
[6] Remove the WORM PULLEY ASSEMBLY and
MECHANISM BELT.
A091_4015BA
A091_4015BCA
MECHANISM BELT
FAN BELT
A091_4017GA
WORM PULLEY
BELT
MECHANISM
A091_4017GCA
SCREW