SMART Technologies 40wi User Manual
Determining your interactive pen’s status
Use the table below to determine the status of your interactive pen.
Status light
Description
Green
Amber
Flashing (0.3 sec
off, 1 sec on)
off, 1 sec on)
Off
Pen is ready to use. It's pointed at the projected image
and connected with the projector. You can interact with
content if the USB connection between the projector and
computer is working.
and connected with the projector. You can interact with
content if the USB connection between the projector and
computer is working.
Off
Flashing (0.3 sec
off, 1 sec on)
off, 1 sec on)
The amber light flashes when you’re unable to interact
with content. It flashes in the following scenarios:
with content. It flashes in the following scenarios:
l
Pen is pointed away from the projected image and
not connected with the projector.
not connected with the projector.
l
Pen is starting up and connecting with your
projector.
projector.
l
Pen is unable to communicate with the projector.
l
The projector is displaying the logo screen and not
a source video image.
Off
On
The USB cable is connected and the pen is charging.
Off
Flashing slowly (1
sec off, 1 sec on)
sec off, 1 sec on)
The pen battery level is less than 20 percent.
Off
Off
The pen’s power switch is off. If the pen is on, it’s been
inactive for 3 minutes and is in sleep mode.
inactive for 3 minutes and is in sleep mode.
C H A P T E R 6
Troubleshooting your interactive projector
43