SMART Technologies 600i3 User Manual

Page of 86
ii
|
INTRODUCTION – IMPORTANT INFORMATION
 
Safety Warnings, Cautions and Important 
Information
WARNINGS – GENERAL
Failure to follow the installation instructions included with your interactive 
whiteboard, or found in this guide, could result in personal injury or product 
damage.
Two people are required to safely mount the projector boom and the 
interactive whiteboard on a wall because the items might be too heavy for one 
person to maneuver onto their wall-mounting brackets.
Do not leave cables on the floor where they can be a tripping hazard. If you 
must run a cable over the floor, lay it in a flat, straight line and secure it to the 
floor with tape or a cable management strip of a contrasting color. Handle 
cables carefully and avoid excessive bending.
To reduce the risk of fire or electric shock, do not expose any component 
of your SMART Board interactive whiteboard system to rain or moisture.
When mounting the projector boom on a framed wall, you must attach both 
the mounting bracket and safety tether to a stud to safely support the 
projector’s weight. If you use only drywall anchors, the drywall can fail, 
resulting in product damage and possible personal injury.
If you remove the bolt supporting the limit strap, the projector’s boom will be 
free to swing. Make sure that the bolt is tightened, and never remove it from 
the unit without supporting the projector boom first.
Do not climb (or allow children to climb) on any part of your 
wall-mounted SMART Board interactive whiteboard system. 
Climbing on your interactive whiteboard or the 
UF55/UF55w projector’s boom could result in personal 
injury or product damage. Do not climb on, hang from or 
suspend objects from the projector’s boom.
Cleaning a boom-mounted projector may result in a fall or injury.