Sony STRDN1020 User Manual

D:\NORM'S JOB\SONY HA\SO0155\STR-DN1020_PMRF 03\4273051141_GB\GB04GET_STR-
DN1020-CEL.fm

STR-DN1020

4-273-051-14(1)

You can enjoy your audio/video equipment connected to the receiver by following the simple steps 
below.

Installing and connecting the 
speakers (page 19, 21)

The image quality depends on the connecting jack. 
See the illustration below. Select the connection 
according to the jacks on your equipment.
We recommend that you connect your video 
equipment via HDMI connection if they have HDMI 
jacks.

To output multi channel digital audio, check the digital 
audio output setting on the connected equipment.
For a Blu-ray Disc player, check that “Audio (HDMI)”, 
“Dolby Digital (Coaxial/Optical)”, and “DTS (Coaxial/
Optical)” are set to “Auto”, “Dolby Digital” and “DTS” 
respectively (as of September 2010).
For a PlayStation 3, check that “BD/DVD Audio Output 
Format (HDMI)” is set to “Bitstream” (with system 
software version 3.5).
For details, refer to the operating instructions supplied 
with the connected equipment.

Y

P

B

/C

B

P

R

/C

R

See “7: Connecting the AC power cord (mains lead)” 
(page 36) and “Initializing the receiver” (page 36).

Select the speaker pattern (page 37), then perform Auto 
Calibration (page 38). 

You can check the speaker connection using “Test Tone” 
(page 93). If the sound is not output correctly, check the 
speaker connection and make the settings explained 
above again.